Electric breast pump Malaysia and manual breast pumps are the two main types. And within each type, you can choose from a variety of pumps.
Even though every pump is different, the basic steps are the same for all of them. When using a pump for the first time, it’s a good idea to always read the instructions so you can find any special parts.
Read on to find out how to use both electric and hand-cranked breast pumps.
How To Use An Electric Pump
Make sure that every part of your breast pump is clean and has been sterilized before you use it. Read the manual to get a feel for how the process works.
When you’re ready to pump, go somewhere quiet with a plug, if you need one. Batteries may work with some electric pumps.
Then, do such basic things.
1. To make sure your hands are clean, wash them.
2. Put together the breast shield, the milk container, the tube, and the breast pump.
3. Put the breast shield on top of your breast. It should fit right and not hurt. Your nipple should be 3 to 4 millimeters bigger than the size of the tunnel. Put it in the middle and gently press down to make a good seal.
4. Think about your baby to make your body let go. Turn on the pump and set it to a low setting. You can slowly make it harder as long as it doesn’t hurt. Keep making changes until milk comes out.
5. Clean the breast shield and any parts that touched the breast milk after each use. The manual for each breast pump will tell you how to clean it in a different way. Pay close attention to these.
Does A Higher Speed Help You Pump More?
A breast pump with a higher or faster speed may help you make more milk more quickly. But you should remember that other things, like how much milk you make and how comfortable you are, are also important.
It could take a while for your body to make enough milk. A lactation consultant can help you figure out how to set up your breast pump if you don’t know how.
How To Use A Hand Or Manual Pump
Make sure that every part of your breast pump is clean and has been sterilized before you use it. Read the manual to get a feel for how the process works. Find somewhere quiet to pump. Then, do these basic things.
1. Wash your hands to ensure they are clean.
2. Start hand-expressing by gently massaging each breast in a pumping motion, so that you squeeze and pull the breast out, then let go as it falls back into place.
3. After you have stimulated your breasts, put one nipple in the center of the pump’s flange and lay it flat against your breast.
4. Start pumping the handle gently with a smooth, rhythmic motion that should look like your baby sucking.
5. Steps 3 and 4 should be repeated for the other breast. Move between your breasts as often as you need to help your milk come out.
6. Finish by writing by hand.
It might take some time to figure out how to use a breast pump. Make sure to read the manual and carefully do what it says. A lactation consultant can help you if you are having trouble pumping or with how to use your breast pump.